|
R/C SPEED CONTROLLERS The primary purpose of a Speed Control Unit (SCU), is to provide the modeler with the ability to vary the speed & direction (Forward or Reverse) of his ship. Speed Controls are manufactured in many varieties of size & power levels for optimal performance for a specific Drive Train. Keeping this in mind, and understanding exactly your desired performance level, we have integrated several brands of Speed Controls into our inventory to span a wide range of possibilities for the modeller to choose from. We have assembled a selection of Speed Controls which plug directly into the receiver, thereby eliminating the use of a servo & linkages, making construction much easier. If you need further assistance, please feel free to call us at any time. 585-494-0027 Please specify Radio Brand being used with this Speed Control.
|
|
VIPER-15 The Viper Marine15 is a Brushed Speed Control designed specifically for use in RC boats. The Marine15 has a 15Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 15Amps under load (with the prop connected, under water). The Marine15 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 15Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds. The Marine15 is the first in line in the Viper range of Speed Controls suited to RC model boats, which means it has all the features that you would expect on a more expensive Speed Control! Features such as adjustable reverse functions and a built in failsafe are standard on this entry level Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility. A break down of the Viper Marine15 specification can be seen below
|
MARINE-15: $ 50.00 |
|
VIPER-10 The MicroViper Marine10 is very powerful for it's small size, it has been designed to run up to a maximum of 10Amps, making it a perfect alternative or upgrade for any small, low power RC boat! With a 10Amp motor limit and it's incredibly small size, the MicroViper Marine10 is invaluable in the small scale boats where space is at a premium! But don't let it's small size fool you! Like it's bigger brothers in the Viper range, it is packed full of features, including motor short protection, motor stall protection, adjustable reverse including reverse disable, built in failsafe and is also 100% waterproof. MicroViper Marine10 specification
The MicroViper Marine10 comes with standard battery and motor connections fitted so it is easy to fit straight into any RC car install. |
MARINE-10: $ 45.00 |
|
VIPER-20 The Viper Marine20 is a Brushed Speed Control designed specifically for use in RC boats. The Marine20 has a 20Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 20Amps under load (with the prop connected, under water). The Marine20 and is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 20Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds. The Marine20 is the big brother to the Marine15 from the Viper range of Speed Controls suited to RC model boats, which means it has all the same features as that of the Marine15 and other more expensive Speed Controls! Features such as adjustable reverse functions and a built in failsafe are standard on this Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility. A break down of the Viper Marine20 specification can be seen below
|
MARINE-20: $ 57.00 |
|
VIPER-25 The Viper Marine25 is a Brushed Speed Control designed specifically for use in RC boats. The Marine25 has a 25Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 25Amps under load (with the prop connected, under water). The Marine25 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 25Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds. The Marine25 is the next step up in power after the Marine20 in the Viper range of Speed Controls suited to RC model boats, which means it has all the same features the Marine15 and Marine20 but with more power! It also has everything you would expect on a more expensive Speed Control! Features such as adjustable reverse functions and a built in failsafe are standard on Marine25 and the motor stall protection is a feature which cannot be overlooked when a possible encouter with weeds is always a possibility. A break down of the Viper Marine25 specification can be seen below NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST** ABSOLUTE short circuit and motor overload protection
|
MARINE – 25: $ 65.00
|
|
VIPER-40 The Viper Marine40 is a Brushed Speed Control designed specifically for use in RC boats. The Marine40 has a 40Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 40Amps under load (with the prop connected, under water). The Marine40 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 40Amp limit reversible electronic Speed Control or for anybody who uses anything from scale model RC boats at scale speeds to scale speed boats. The Marine40 is the highest powered marine speed controller in the Viper range of Speed Controls suited to RC model boats, which means it has all the same features as all the other Viper marine speed controllers but with more power! It also has everything you would expect on a more expensive Speed Control! Features such as adjustable reverse functions and a built in failsafe are standard on Marine40 and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility. One difference to note between the Marine40 and the others in the marine range is that the Marine40 comes with user solder able posts instead on pre installed wires. This gives the user the option to use their own wiring looms! A break down of the Viper Marine40 specification can be seen below
|
MARINE-40: $ 72.00 |
|
VIPER-75 The Viper Marine75 is a Brushed Speed Control designed specifically for use in RC boats. The Marine40 has a 75Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 75Amps under load (with the prop connected, under water). The Marine75 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 75Amp limit reversible electronic Speed Control or for anybody who uses anything from scale model RC boats at scale speeds to scale speed boats. The Marine75 is the highest powered marine speed controller in the Viper range of Speed Controls suited to RC model boats, which means it has all the same features as all the other Viper marine speed controllers but with more power! It also has everything you would expect on a more expensive Speed Control! Features such as adjustable reverse functions and a built in failsafe are standard on Marine75 and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility.
INSTRUCTION MANUAL FOR VIPER-75 |
PICTURE COMING SOON PRODUCT AVAILABLE NOW
MARINE-75: $ 125.00 |
|
VIPER-MIRROR
The Viper Marine MIRROR is a Brushed Speed Control designed specifically for use in RC model boats where identical operation in both directions is required, for example a bow thruster! The Marine MIRROR, 'Mirrors' the operation exactly about the neutral point of your transmitter. It also features the new Plug n Play set up which in effect means .... no set up!!! The Speed control learns as you use it and calibrates itself to your transmitter without you having to do anything! The Marine MIRROR has a 25Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 25Amps under load (with the prop connected, under water). The Marine MIRROR is suited to all RC model boats, which means it has all the features that you would expect on a more expensive Speed Control! Features such as a built in failsafe are standard on this Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encouter with weeds is always a possibility. A break down of the Viper Marine MIRROR specification can be seen below
INSTRUCTION MANUAL FOR VIPER-MIRROR |
MARINE -MIRROR: $ 40.00
|
